Jotun Anti-Skid Product Description Jotun Anti-Skid is aluminium oxide grains, intended to be spread into the last coat in a non-skid system. Available in extra coarse, coarse, medium and fine particle sizes. Recommended Use For use on decks, floors, gangways and other areas where additional friction properties are required. The spreading is to take place in the wet film during application. Recommended Quantity Fine particle size (180 - 250 µm) for coatings applied in 50 to 150 µm DFT, such as topcoats. The recommended usage is 1,5 - 2,0 kg per 10 litres of paint Medium particle size (400 - 600 µm) for coatings applied in 150 to 400 µm DFT, such as Jotamastic products and thick film topcoats. The recommended usage is 2,5 - 3,3 kg per 10 litres of paint Coarse particle size (700 - 1000 µm) for coatings applied in 400 to 1500 µm DFT, such as Baltoflake products. The recommended usage is 3,0 - 4,0 kg per 10 litres of paint Extra Coarse particle size (1200 - 1600 µm) for coatings applied in 400 to 1500 µm DFT, such as Baltoflake products. The recommended usage is 3,5 - 4,0 kg per 10 litres of paint If a more rough surface is required, the quantity may be increased. Physical Properties Colour Dark Solids (Vol %)* 100 ± Flash Point N.A. *Measured according to ISO 3233:1998 (E) Hong Kong rules: Category of paints - Other vessel coatings; Exempt compound - N/A; Specific gravity: 3.92 kg/ltr (Coarse); 3.92 kg/ltr (Fine); 3.92 kg/ltr (Medium); 3.92 kg/ltr (Extra Coarse). Both VOC and Specific gravity values provided are typical values, subject to changes when different colour involved. Surface Preparation Coated Surfaces According to specifications for the chosen topcoat. Other Surfaces The coating may be used on other substrates. Please contact your local Jotun office for more information.
read more