Hst Solutions Sdn Bhd
Lot 49, 49M & 49A,
Jalan Mamanda 9,
Ampang Point,
68000 Ampang,
Selangor, Malaysia.
Lot 49, 49M & 49A,
Jalan Mamanda 9,
Ampang Point,
68000 Ampang,
Selangor, Malaysia.
+603-42666848
+60178713668
Pilot ACR
Previous | 4 / 4 | Next |
Download Files
Safety_Precautions.pdf (177.69 KB)Colour_Card.pdf (739.46 KB)
Brochure.pdf (1 MB)
TDS.pdf (0.91 MB)
Description:
Single Pack Topcoat
Pilot ACR is a quick drying high build, one component acrylic finish.
Pilot ACR can be used as a single coat system in atmospheric corrosivity category C2. It can also be used as a TC on various primers. Can be used at low temperatures.
Pilot ACR is an acylic based topcoat for both exterior and interior use. This product is part of a complete
system which is certified not to spread surface flames. Pilot ACR system suitable for steel and woodwork. Good weather and colour stability. Good hiding power.
Pilot ACR is semi-glossy single pack acylic topcoat recommended for use either over an existing oil based topcoat, or over Vinyguard Silvergrey 88 primer or Alkyd Primer. It can be used on steel, wood or grp. It is available in almost any colour.
Colours available in white and colous tinted from Multicolor industry tinting system (MCI). Available in 5L pack.
http://www.jotun.com/ww/en/b2b/technical-info/calculator/
Application method : | Brush, roller, conventional air spray, high pressure airless spray | ||
Drying time : | 1 hours @ 23c | ||
Coverage : | 4.6sq. metres per litre using brush or roller | ||
Coats: | 2 | ||
Thinner : | No 7 | ||
Water resistance : | Limited | ||
Flexibility : | Good | ||
Gloss level : | Semigloss | ||
Gloss retention : | Good | ||
Chemical Resistance : | Good |