Hst Solutions Sdn Bhd
Lot 49, 49M & 49A,
Jalan Mamanda 9,
Ampang Point,
68000 Ampang,
Selangor, Malaysia.
Lot 49, 49M & 49A,
Jalan Mamanda 9,
Ampang Point,
68000 Ampang,
Selangor, Malaysia.
+603-42666848
+60178713668
Jotafloor PU Topcoat
Previous | 2 / 6 | Next |
Product description
This is a two component isocyanate cured polyurethane coating. It is a high performance, non yellowing product.
It is easy to apply.
This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system.
It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced slip resistance
is required Jotafloor Non Slip can be used in the system.
To be used as topcoat in atmospheric environments. Suitable on approved primers on concrete substrates.
Approvals and certificates Determination of Elongation - ASTM D2730 Determination of ease of decontamination -
BS4247 Part 1:1987 Colours according to colour card and Multicolor Industry tinting system (MCI)
Typical use Designed for a wide range of floors and walls with various levels of mechanical and chemical exposure.
Specially designed for areas exposed to direct sunlight where gloss and colour stability is desired. Recommended as a
topcoat as part of the car parks, parking bays, pedestrian walkways, industrial floors, drive ways, ramps and
traffic deck systems.
Additional certificates and approvals may be available on request.
This is a two component isocyanate cured polyurethane coating. It is a high performance, non yellowing product.
It is easy to apply.
This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system.
It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced slip resistance
is required Jotafloor Non Slip can be used in the system.
To be used as topcoat in atmospheric environments. Suitable on approved primers on concrete substrates.
Approvals and certificates Determination of Elongation - ASTM D2730 Determination of ease of decontamination -
BS4247 Part 1:1987 Colours according to colour card and Multicolor Industry tinting system (MCI)
Typical use Designed for a wide range of floors and walls with various levels of mechanical and chemical exposure.
Specially designed for areas exposed to direct sunlight where gloss and colour stability is desired. Recommended as a
topcoat as part of the car parks, parking bays, pedestrian walkways, industrial floors, drive ways, ramps and
traffic deck systems.
Additional certificates and approvals may be available on request.